DOWNLOAD Lenovo Zuk Z1 Latest Firmware FREE

ZUK Z1 Smartphone

Note:-

           Make sure you have charged up to 70% Battery
Steps:-

1. Download the firmware from link below and rename it to update.zip and copy it on your SD Card
2. Now boot into recovery
3. Select the install update from SD card
4. Now select the update.zip
5. The process will take several minutes to complete so please have patience

 How to enter in boot option.?

1. Turn off the device

1. Press and hold Power key until vibrates one

1. Press and hold Volume UP key + Volume down key

1. Release all key when Recovery mode appear

1. Scrolling with volume key and confirm with power key

Note:-

• The update process takes a long time and in between the screen might flicker and restart many times so do not worry as it is a part of the update process. The screen might also go blank for a moment and then it will start displaying the progress.
• Keep the charger connected to the device if your battery is below 50%. There are chances that the battery may get drained completely in between the update process and then the device might go to bootloop. So take the precaution earlier.
• Take a backup of your memory card as well on your pc because if your current default storage is the memory card then there is chance of the files getting deleted after the update.
• If you have set a pin or password then please remove it before updating because after the update process is done you’ll have to re-enter it and register your finger print again.
• After your Lenovo Zuk Z1 has been upgraded to Latest version do a factory reset to get a smooth experience 

                                                                     DOWNLOAD HERE